DELTA 33-890 12-Inch 2-Horsepower Radial Arm Saw, 230-Volt 1-Phase | 
 enlarge | Brand: DELTA
Category: Home Improvement
List Price: $4,620.00
Buy New: $2,639.00
You Save: $1981.00 (43%)
New (2) from $2,639.00
Rating:  5 reviews
Sales Rank: 88316
Color: NA
Media: Tools & Hardware
Shipping Weight (lbs): 293
Dimensions (in): 36 x 23 x 32
MPN: 33-890
Model: 33-890
UPC: 069554338908
EAN: 0069554338908
ASIN: B00002234Z
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | Arm saw features a radial arm for 360-degree blade rotation | | • | Rotates up to 3,450 RPM to easily handle larger, more difficult projects | | • | Crosscuts stock up to 3-3/4-inch thick by 14-3/8 inches wide | | • | Provides precision indexing with positive stops at 90-degree and 45-degree miter cuts | | • | Automatic built-in blade brake increases safety while reducing downtime |
|
| Accessories:
|
| Similar Items:
| |
| Editorial Reviews:
Amazon.com Product Description
The DELTA 33-890 12-Inch 2 HP Radial Arm Saw is designed with a versatile radial arm that allows for 360-degree blade rotation, which allows you to utilize the entire table surface during left and right miter cuts. Powered by a 2 HP, 230-volt single phase motor, the radial arm saw can rotate at 3,450 RPM to handle larger, more difficult projects. Easily crosscut stock up to 3-3/4-inch thick by 14-3/8 inches wide on a table that comfortably rips up to 24-1/4 inches of material in length. Execute projects with superior accuracy with perfect alignment on its rigid channel, cast-iron frame and heavy column. Lifetime accuracy is all but guaranteed on this machine, which provides precision indexing with positive stops at 90-degree and 45-degree miter cuts. Smooth hardened surfaces adorn the truck rods to minimize rolling friction, and can be rotated 180 degrees for a new bearing surface. In addition, an automatic blade brake is built in for added safety and reduced downtime.
|
| Customer Reviews:
This machine is built like a tank... March 31, 2007
BJO (New England)
4 out of 4 found this review helpful
I must say I am very pleased with this machine. With my 8 1/4 inch Ryobi (RA202) being rendered useless with an unrepairable recall I was in the market for a new RAS. With the market being so limited, I began looking at what was available with Delta, Craftsman and Original Saw (which was out of my price range). I considered the 10 inch Delta, but after researching and reading many reviews I chose the 33-890. I have not been disappointed. The saw was pretty much dead-on right out of the box. It does take a while to fully set up and run through the various alignment steps, but other than having to tweak the table runners to make the height consistent with the blade, everything else aligned right-on with a first pass. The thing that impressed me most about this saw was the quality of the construction. I mean everything on this unit is made of metal. It is really solidly built and something you do not see on a lot of woodworking tools today. I have run both the stock blade that came with the saw as well as a Freud 8 inch dado(model SD508) and both work very well with both pine and red oak boards. The Delta blade however emits a rather high pitch whine when the motor eventually reaches full speed. I plan to order a Forrest WW1 blade with a dampener to eliminate that problem. Also, be aware that the blade selection for a 12 inch with a 5/8 inch arbor is rather limited. As I mentioned, Forrest does make one with the WW1 model. All in all this is a great saw. You will not be disappointed.
Update - 04/19/2007 - As a follow-up I e-mailed Delta to ask about the "stop" time on the electric braking mechanism which for me was 18 seconds (from switch off to complete stop of blade rotation). The response from customer support was this time was better than the factory specification which ranges from 25-45 seconds. So again, I am pleased with the performance.
30 yrs n still strong January 25, 2007
Dan Briggs (CA, USA)
2 out of 4 found this review helpful
I bought the earlier version of this saw from a carpenter friend of mine over 20 yrs ago, n he had it for 8-10 yrs. (built his house with it) and I just passed it on to my son. All it ever needs is an occasional cleaning and tune-up and it purrrrs like a kitten. The only thing I might suggest is if your buying it for the 1st time, AND u don't already have a 12" saw, spend the bucks for the 16" saw, just because bigger always finds a way to be used.........
Last a lifetime October 10, 2006
J. Morton
4 out of 8 found this review helpful
Solid as a rock, will be the last RAS I'll ever buy.
A Great Saw March 16, 2001
James E. Boundy (WILLIAMSVILLE, NY United States)
48 out of 49 found this review helpful
This is an excellent saw! It has a very heavy duty frame and leg assembly. Very sturdy throughout. All cuts are precise once all setup adjustments are made. The motor has more than enough power for cutting dado's or making thick cuts. 10" saws look delicate next to it. It's made in the USA, exhibiting excellent quality throughout. The only saw that might be better, would be one made by the "Original Saw Company", and you will spend alot more. For the money, this saw is hard to beat. No complaints here. I'm very happy with my purchase.
Crosscut master February 7, 2001
Jeff Andersen (Ainsworth, NE)
66 out of 67 found this review helpful
I replaced my "antique" radial arm with the Delta 33-890. What a difference! I build furniture, and I had trouble with my old one staying square. The Delta is built like a tank and after initial setup and adjustment I've never adjusted anything and it's always dead square. It has plenty of power to crosscut 3" thick White Oak planks. I rip on a tablesaw so I can't say how it does in that operation. The only complaint about the saw is the steel blade provided with the saw. It seems to me that for the money this machine costs, they could send a carbide tipped blade. I put a Forrest WW1, (12" 60T) blade on my saw and this is the best crosscut saw I've used.
|
|
|
